Filter
Top Products
CONVERTER SYSTEM 6-27
High Altitude Setting Information
Specifications
Altitude Drive Pulley Carburetor
m (ft) Ramp Weights Spring Spacer (qty) Main Jet
(1) Front: #152 (P/No. 92063-1331)
(STD)
0 ∼ 1 200
(0 ∼ 3 900)
P/No. 39152-1081
(STD, C )
P/No. 92026-1603
t = 1 mm (0.04 in.)
Rear: #158 (P/No. 92063-1344)
(STD)
1 200 ∼ 2 500
(3 900 ∼ 8 200)
P/No. 39152-1081
(STD, C )
P/No. 92026-1603
t = 1 mm (0.04 in.)
(1) Front:
Rear:
#145 (P/No. 92063-1017)
#152 (P/No. 92063-1331)
2 500 ∼ 3 500
(8 200 ∼ 11 500)
P/No. 39152-1088
(C1)
P/No. 92026-1603
t = 1 mm (0.04 in.)
(2) Front:
Rear:
#142 (P/No. 92063-1016)
#148 (P/No. 92063-1324)
3 500 ∼ 4 500
(11 500 ∼ 14 800)
P/No. 39152-1088
(C1)
P/No. 92026-1603
t = 1 mm (0.04 in.)
(2) Front:
Rear:
#135 (P/No. 92063-1014)
#140 (P/No. 92063-1013)
C, C1: Identification Marks
qty: quantity
•
Refer to the Drive Pulley section in this chapter and Carburetor section in the Fuel System chapter
for the parts replacement.