Filter
Top Products
3-24 FUEL SYSTEM
Air Clean er
Air Cleaner Element Re moval
•
Remove:
Seat (see Frame chapter)
Clips [A]
Air Cleaner Housing Cap [B]
•
Remove:
Element Cover Screw [A]
Element Cover [B]
Element [C]
•
After removing the element, stuff pieces of lint-free, clean
cloth into the air cleaner ducts to keep dirt out of the car-
buretor and engine.
WARNING
If dirt or dust i s allowed to pass through into the
carburetors, the throttle may become stuck, possi-
bly causing an accident.
CAUTION
If dirt gets through into the engine, excessive en-
gine wear and possibly engine damage will occur.
Air Cleaner Element Installation
•
Install:
Element
Element Cover
•
Tighten:
To rque - Element Cover Screw: 3.5 N·m (0.35 kgf·m, 31
in·lb)
Air Cleaner Element Cleaning and Inspection
•
Refer to the Air Cleaner Element Cleaning and Inspection
in the Periodic Maintenance chapter.
Air Cleaner Housing Removal
•
Remove:
Side Covers (see Frame chapter)
Air Cleaner Housing Cap
Air Cleaner Element (see Air Cleaner Element Removal)