Kawasaki Brute Force 750 4x4i Offroad Vehicle User Manual


 
17-32 ELECTRICAL SYSTEM
Charging System
Regulator Circuit Test-2nd Step
Connect the test light and a 12 V battery in the same man-
ner as specified in the "Regulator Circuit Test-1st Step".
Apply 12 V to the BR terminal.
Check Y1, Y2, and Y3 terminals.
If the test l ight turns on, the regulator/rectifier is defective.
If the test light does not turn on, continue the test.
Regulator Circuit Test-3rd Step
Connect the test light and a 12 V battery in the same man-
ner as specified in the "Regulator Circuit Test-1st Step".
Momentarily apply 24 V to the BR terminal by adding a 12
V battery.
Check Y1, Y2, and Y3 terminals.
CAUTION
Do not apply more than 24 V to the regulator/recti-
fier. Do not leave the 24 V applied for more than a
few seconds, or the unit will be damaged.
If the test light did not light when the 24 V was applied
momentarily to the BR terminal, the regulator/rectifier is
defective.
If the regulator/rectifier passes all of the tests described,
it may still be defective. If the charging system still does
not work properly after checking all of the components
and the battery, test t he regulator/rectifier by replacing it
with a known good unit.