ELECTRICAL SYSTEM 17-85
Carburetor Heater System
Carburetor Heater Inspection
•
Disconnect:
Carburetor Heater Lead Connectors [A]
Ground Lead Connector [B]
•
Using the hand tester, measure the resistance of the
heater.
•
Connect the tester between the heater terminal and the
ground terminal.
If the tester does not read as specified, replace the heater.
Carburetor Heater Resistance
11 ∼ 20 Ω
Carburetor Heater System Circuit
1. Carburetor Heaters 12 V 23 W
2. Air Temperature Sensor
3. Ignition Switch
4. Main Fuse 30 A
5. Alternator
6. Starter Relay
7. Battery
8. Engine Ground Terminal