Filter
Top Products
ENGINE TOP END 5-3
Exploded View
Torque
No. Fastener
N·m kgf·m ft·lb
Remarks
1 Rocker Case Bolts 55 mm (2.2 in.) 8.8 0.90 78 in·lb S
2 Rocker Case Bolts 130 mm (5.1 in.) 9.8 1.0 87 in·lb S
3 Rocker Case Bolts 30 mm (1.2 in.) 9.8 1.0 87 in·lb S
4 Rocker Case Bolts 25 mm (1.0 in.) 9.8 1.0 87 in·lb S
5 Cylinder Head Bolts (M10), First Torque 25 2.5 18 S, MO
5 Cylinder Head Bolts (M10), Final Torque 49 5.0 36 S
6
Cylinder Head Bolts (M6)
9.8 1.0 87 in·lb
7 Valve Adjusting Cap Bolts 8.8 0.90 78 in·lb
8 Water Pipe Mounting Bolts 8.8 0.80 78 in·lb
9
Rocker Shaft Bolts
20 2.0 14
10 Valve Adjusting Screw Locknuts 12 1.2 104 in·lb
G: Apply grease.
M: Apply molybdenum disulfide grease.
MO: Apply molybdenum disulfide oil solution (mixture of the engine oil and molybdenum disulfide
grease in a weight ratio 10 : 1).
S: Follow the specific tightening sequence.
SS: Apply silicone sealant (Three Bond: TB1211F or GE SILICONES TRANSLUCENT RTV128).