Filter
Top Products
FINAL DRIVE 12-7
Exploded View
Torque
No. Fastener
N·m kgf·m ft·lb
Remarks
1 Variable Differential Control Shift Shaft Lever Bolt 8.8 0.90 78 in·lb
2 Front Final Gear Case Left Cover Bolts (M6) 9.8 1.0 87 in·lb L(4), S
3 Ring Gear Bolts 57 5.8 42 LB
4 Front Final Gear Case Center Cover Bolts (M6) 9.8 1.0 87 in·lb L
5 Front Final Gear Case Center Cover Bolts (M8) 24 2.4 17 L
6 Front Final Gear Case Oil Filler Cap 29 3.0 22
7
Pinion Gear Bearing Holder Nut
127 13 94
St
8 Pinion Gear Bearing Holder 137 14 101 L
9 Front Final Gear Case Coupling Nut 25 2.5 18
10 Front Final Gear Case Oil Drain Plug 15 1.5 11
11 2WD/4WD Actuator Mounting Bolts 9.8 1.0 87 in·lb L, S
12 Variable Differential Control Cable Locknut 17 1.7 12
13 Variable Differential Control Lever Bolt – – – L
14 Front Final Gear Case Nuts 59 6.0 43
G: Apply grease.
L: Apply a non-permanent locking agent.
LB: Apply a non-permanent locking agent (Three Bond TB2471 Blue).
M: Apply molybdenum disulfide grease.
O: Apply engine oil.
R: Replacement Parts
S: Follow the specific tightening sequence.
St: Stake the fasteners t o prevent loosening.