Filter
Top Products
12-36 FIN AL DRIVE
Front Final Gear Case
•
Remove:
Front Fender (see Frame chapter)
Front Wheels (see Wheels/Tires chapter)
Steering Stem (see Steering chapter)
Front Axles (see Front Axle Removal)
Right Upper Suspension Arm (see Suspension chapter)
Right Front Shock Absorber (see Suspension chapter)
Front Propeller Shaft (see Front Propeller Shaft Re-
moval)
Actuator Lead Connector (disconnect)
Variable Differential Control Cable Lower End
Air Duct [A]
Brake Hose Joint Bolt [B]
•
Remove:
Front Final Gear Case Bolts [A]
•
Remove:
Bracket Bolts [A]
Bracket
•
Remove the rear final gear case [A] as shown.
Front Final Gear Case Installation
•
Install the gear case bolts from the vehicle left side.
To rque - Front Final Gear Case Nuts: 59 N·m (6.0 kgf·m, 43
ft·lb)
•
Install the removed parts.
•
Fill the front final gear case with the specified oil (see
Front Final Gear Case Oil Change in Periodic Mainte-
nance chapter).