Kawasaki Brute Force 750 4x4i Offroad Vehicle User Manual


 
11-10 W HEELS/TIRES
Wheels (Rims)
If the tire is removed, inspect the air sealing surfaces [A]
of the rim for scratches or nicks. Smooth the sealing sur-
faces with fine emery cloth if necessary.
Wheel (Rim) Replacement
Remove the wheel (see Wheel Removal).
Disassemble the tire from the rim (see Tire Removal).
Remove the air valve and discard it.
CAUTION
Replace the air valve whenever the tire is replaced.
Do not reuse the air valve.
Plastic Cap [A]
ValveCore[B]
Stem Seal [C]
Valve Stem [D]
Valve Seat [E]
Valve Opened [F]
Install a new air valve in the new rim.
Remove the valve cap, lubricate the stem with a soap and
water solution, and pull the stem [A] through the rim from
the inside out until it snaps into place.
CAUTION
Do not use engine oil or petroleum distillates to lu-
bricate the stem because they will deteriorate the
rubber.
Mount the tire on the new rim (see Tire Installation).
Install the wheel (see Wheel Installation).
Install the air valve cap.