Filter
Top Products
ENGINE TOP END 5-27
Camshaft
•
Install the intermediate shaft chain tensioner [A] as fol-
lows:
•
Release the stopper [B] and push the push rod [C] into
the tensioner body.
•
Insert a wire [D] into the r od hole to hold t he rod in place.
•
Install:
Intermediate Shaft Chain Tensioner [A]
•
Tighten:
Torque - Intermediate Shaft Chain Tensioner Bolts [B]: 8.8
N·m (0.90 kgf·m, 78 in·lb)
•
Remove the wire [C] to free the push rod.
•
Confirm that the punch mark [A] on the intermediate shaft
sprocket (Right Side) is aligned with the embossed mark
[B] on the crankcase.
•
Face the arrow mark [A] upward.
•
Align the marks [B] on the weights with the front cylinder
head upper surface [C].
•
Place the front camshaft chain on the front camshaft
sprocket.
•
Apply grease to the O-ring [A] and install the cover [B] into
the right side of the crankcase so that the tapped hole [C]
faces outward.