Filter
Top Products
CRANKSHAFT/T RANSMISSION 10-3
Exploded View
Torque
No. Fastener
N·m kgf·m ft·lb
Remarks
1 Connecting Rod Big End Cap Nuts 34 3.5 25 MO
2 Engine Drain Plug 20 2.0 14
3 Crankcase Bolts (M8) 75 mm (2.95 in.) 20 2.0 14 S
4 Crankcase Bolts (M8) 110 mm (4.33 in.) 20 2.0 14 S
5 Crankcase Bolt (M8) 110 mm (4.33 in.) 20 2.0 14 S, L (1)
6 Crankcase Bolts (M6) 40 mm (1.57 in.) 9.8 1.0 87 in·lb
7 Crankcase Bolts (M6) 65 mm (2.56 in.) 9.8 1.0 87 in·lb L
8 Bearing Position Plate Screws 4.9 0.50 43 in·lb
9. Do not apply a non-permanent locking agent to this area (2 ∼ 3 mm, 0.08 ∼ 0.12 in.)
10. About 12 mm (0.47 in.)
11. White Mark: Face the mark backwards and align it with the crankcase mark.
12. Face the seal of the bearing to the left side (outward).
G: Apply grease.
L: Apply a non-permanent locking agent.
LG: Apply liquid gasket (Kawasaki Bond: 92104-1063 or Three Bond 1216).
M: Apply molybdenum disulfide grease.
MO: Apply molybdenum disulfide oil solution (mixture of the engine oil and molybdenum disulfide
grease in a weight ratio 10 : 1).
O: Apply engine oil.
S: Follow the specific tightening sequence.