Filter
Top Products
4-14 C OOLING SYSTEM
Radiator
•
Pull the projections [A] out of from the dampers [B], and
remove radiator [C].
CAUTION
Do not touch the radiator core. This could damage
the radiator fins, resulting in loss of cooling effi-
ciency.
Radiator Installation
•
Insert the projections of the radiator in the dampers.
•
Install:
Dampers [A]
Collars [B]
•
Tighten:
To rque - Radiator Mounting Bolts [C]: 8.8 N·m (0.90 kgf·m,
78 in·lb)
•
Connect:
Radiator Fan Motor Lead Connector [A]
•
Install the fan motor breather hose [B].
NOTE
○
Do not apply lubricant at fitting hose region.
•
Install:
Radiator Hoses [C]
Reserve Tank Hose [D]
Clamps [E]
•
Run the hoses according to the C able, Wire, and Hose
Routing section in the Appendix chapter.
Radiator Fan Removal
•
Remove:
Radiator (see Radiator Removal)
Radiator Fan Assembly Bolts [A]
Fan Assembly [B]
Radiator Fan Installation
•
Install:
Radiator Fan
Radiator Fan Mounting Nut
•
Install:
Radiator Fan Assembly
•
Tighten:
Torque - Radiator Fan Assembly Bolts: 4.9 N·m (0.50 kgf·m,
43 in·lb)