Filter
Top Products
FINAL DRIVE 12-61
Rear Final Gear Case
Rear Final Gear Case Oil Level Inspection
•
Park the vehicle so that it is level, both side-to-side and
front-to-rear.
•
Remove the filler cap.
CAUTION
Be careful not to allow any dirt or foreign materials
to enter the gear case.
•
Check the oil level. The oil level should come to the bot-
tom of t he filler opening [A].
If it is insufficient, first check the rear final gear case for oil
leakage, remedy it if necessary, and add oil through the
filler opening. Use the same type and brand of oil that is
already in the final gear case.
•
Apply grease to the O -ring [B].
•
Be sure the O-ring is in place.
Torque - Oil Filler Cap: 29 N·m (3.0 kgf·m, 22 ft·lb)
Rear Final Gear Case Oil Change
•
Refer to the Rear Final Gear Case Oil Change in the Pe-
riodic Maintenance chapter.
Rear Final G ear Case Removal
•
Remove:
Rear Fender (see Frame chapter)
Fuel Tank (see Fuel System chapter)
Rear Wheels (see Wheels/Tires chapter)
Rear Propeller Shaft (Rear Propeller Shaft Removal)
Rear Axles (see Rear Axle Removal)
Brake Cable Rear Ends
Brake Cam Lever
Rear Final Gear Case Bolts [A] and Washers (rear)
•
Remove:
Bracket Bolts [A]
Collars [B]
Bracket [ C]