Filter
Top Products
5-24 ENGINE TOP END
Camshaft
•
Remove:
Circlips [A]
Weights [B]
Spring [C]
NOTE
○
Do not remove the shaft [A] and pin [B].
○
If the parts are removed, they cannot be reinstalled.
KACR Installation
•
Install:
Weights
Circlips
Spring [A]
○
Hook the spring from the outside with the open side of the
hook inwards.
•
Install:
KACR U nit
•
Hook the arms [ B] on the pins.
•
Apply a non-permanent locking agent to the camshaft
sprocket bolts [C] and tighten them.
Torque - Camshaft Sprocket Bolts: 12 N·m (1.2 kgf·m, 104
in·lb)
Cam shaft Chain Removal
•
Remove (left side view):
Rear and Front Camshafts (see Camshaft Removal)
Alternator Rotor (see Electrical System chapter)
Oil Pump (see Engine Lubrication System chapter)
Intermediate Shaft Chain Tensioner [A]
Circlip [B] and Washer
Special Tool - Outside Circlip Pliers: 57001-144
•
Remove:
Intermediate Shaft Chain Guides [C]
Position Plate Bolts [D] and Position Plate