Filter
Top Products
6-26 CONVERTER SYSTEM
Driven Pulley
•
Install two washers [A] on the shaft as shown.
Crankcase Side [B]
Bolt Head Side [C]
•
Using a flywheel & pulley holder [A] and attachments [B],
tighten the driven pulley nut [C].
Special Tools - Flywheel & Pulley Holder: 57001-1343
Pulley Holder Attachment: 57001-1472
Torque - Driven P ulley Nut: 93 N·m (9.5 kgf·m, 69 ft·lb)