Filter
Top Products
Chapter 3 Configuring Devices
Using the Templates
3-42
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Maximum RTS Retries (1-128) Enter the maximum number of times the
access point issues an RTS before stopping
the attempt to send the packet through the
radio.
Max. Data Retires (1-128) Enter the maximum number of attempts the
access point makes to send a packet before
giving up and dropping the packet.
Beacon Period (Kusec) Enter the amount of time between beacons in
Kilo microseconds. (One Kmsec equals
1,024 microseconds.)
Data Beacon Rate (DTIM) Enter the amount of time, always a multiple
of the beacon period, to determine how often
the beacon contains a delivery traffic
indication message (DTIM).
The DTIM tells power-save client devices
that a packet is waiting for them.
If the beacon period is set at 100, its default
setting, and the data beacon rate is set at 2, its
default setting, then the access point sends a
beacon containing a DTIM every 200
Kmsecs. (One Kmsec equals 1,024
microseconds.)
Default Radio Channel From the list, select the radio channel you
want for a default. Each channel covers 22
MHz.
The factory setting for Cisco wireless LAN
systems is Radio Channel 6 transmitting at
2437 MHz.
Table 3-10 Radio Hardware Settings (continued)
Field Description