Filter
Top Products
5-21
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 5 Performing Administrative Tasks
Using Discovery and Managing Devices
Procedure
Step 1 Select Administration > Discover > Device Credentials > HTTP
User/Password.
Step 2 Enter a username or modify the username in the User field.
Step 3 Enter or modify the password in the Password field.
Step 4 Enter or modify the password in the Confirm Password field.
Step 5 Click Save.
Related Topic
Chapter 3, “Configuring Devices”
Importing Devices
Instead of running discovery on the WLSE, you can import devices:
• From a file (see Import Devices from a File, page 5-22).
• From CiscoWorks2000 Resource Manager Essentials (see Import Devices
from CiscoWorks2000, page 5-23).
A one-time discovery job starts within 2 minutes after you import devices. All
WLSE-supported devices in the file are used as seed devices with a CDP distance
of 1. These devices are not added to the list of available seed devices in the
Discovery - Configuring Seeds dialog box, but they do appear in the Discovery
Run Log. See Add Seed Devices and Schedule Discovery, page 5-10 and View
Discovery History and Status, page 5-12.
Devices not supported by the WLSE are ignored.
You can choose to discover some devices and import others.
The following information is imported:
• IP addresses are accepted, and hostnames are resolved to obtain the IP
address. Hostnames that cannot be resolved are ignored.
• Read-only and read/write community strings are appended to the end of the
Bulk SNMP Settings table (Administration > Discover > Device
Credentials). See Setting Device Credentials, page 5-17.