Filter
Top Products
Chapter 5 Performing Administrative Tasks
Managing System Parameters
5-58
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Managing System Parameters
The System Parameters window allows you to set global parameters. For example,
to set the interval at which the Wireless Clients reports will be updated, change
the Wireless Client Polling Interval parameters.
Note Your login determines whether you can use this option.
Procedure
Step 1 Select Administration > System Parameters. The following parameters are
displayed in the System Parameters window:
Parameter Description
Inventory Polling Interval Interval at which the configuration data will be collected from the
devices. (This is the data shown in any GUI device detail table.)
Tip For more accurate trending, set this parameter at a lower
interval than Inventory Performance Attributes Polling
Interval.
Default: 1 hour
Inventory Performance
Attributes Polling Interval
Interval at which the performance and utilization data will be
collected from the devices.
To set the aggregation period of this data, change the Aggregation
Interval parameter.
Default: 5 minutes
Wireless Client Polling Interval Interval at which the device data is collected for client information
and the Wireless Clients reports are updated.
Default: 5 minutes