Filter
Top Products
3-67
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Configuring Routing Settings
Use this option to configure the access point to communicate with the IP network
routing system.
Procedure
Step 1 Select Services > Routing. The Services: Routing dialog box appears.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Step 3 Click Add to add an additional network route for the access point.
Step 4 To remove a network route, select it from the list, then click Remove.
Field Description
Default Gateway Enter the IP address of your network's
default gateway in this entry field.
The entry 255.255.255.255 indicates no
gateway.
New Network Route
Destination Network Enter the IP address of the destination
network.
Gateway Enter the IP address of the gateway used to
reach the destination network.
Subnet Mask Enter the subnet mask associated with the
destination network.