Filter
Top Products
Chapter 3 Configuring Devices
Using the Templates
3-76
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Table 3-18 Accounting Settings
Field Description
Enable accounting From the list, select one of the following:
• enable—Use this setting to turn on
accounting for your wireless network.
• disable—Use this setting to turn off
accounting for your wireless network
Enable delaying to report STOP
• enable—Use this setting to delay
sending a stop report to the server when
a client device disassociates from the
access point.
The delay reduces accounting activity
for client devices that disassociate from
the access point and then quickly
reassociate.
• disable—Use this setting to not delay
sending a stop report to the server when
a client device disassociates from the
access point.
Minimum delay time to report
STOP (sec)
Enter the number of seconds the access point
waits before sending a stop report to the
server when a client device disassociates
from the access point.
Server Name/IP Enter the name or IP address of the server to
which the access point sends accounting
data.
Server Type Select RADIUS from the list.
(Additional types may be added in future
software releases.)
Port Enter the communication port setting used by
the access point and the server.
The default setting, 1813, is the correct
setting for Cisco Aironet access points and
Cisco secure ACS.