Filter
Top Products
3-37
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Procedure
Step 1 Select Radio > Identification. The Radio: Identification dialog box displays in
the right pane.
Step 2 Enter the following information to identify the port:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Field Description
Primary Port? From the list, select one of the following:
• yes—Sets the radio port as the primary
port.
• no—Sets the Ethernet port as the
primary port.
Adopt Primary Port Identity? From the list, select one of the following:
• yes—This adopts the primary port
settings (MAC and IP addresses) for the
Ethernet port.
• no—This uses different MAC and IP
addresses for the Ethernet port.