Filter
Top Products
4-11
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 4 Using Reports
Displaying Current Reports
Displaying an AP Summary Report
Procedure
Step 1 Select Reports > Current. The window refreshes with a device selector in the left
pane.
Step 2 From the device selector in the left pane, click to expand the folder and select the
device for which you want a report. The right pane refreshes.
Step 3 From the Report Name list, select Summary Report.
Step 4 Click View. Two tables are displayed: the AP Summary Report and the Fault
Summary.
Table 4-3 AP Summary Report
Column Description
Name The system name for the device.
Timestamp The time the fault was reported.
For more information, see Date and Time
Display on the WLSE, page 1-2.
MAC Address The device’s MAC address.
IP Address The device’s IP address.
Click to open up a browser window to the AP
Summary Status.
Software Version The version of software running on the
device.
Number of Clients connected The number of wireless clients connected to
the device.
Number of Bridges Connected The number of wireless bridges connected to
the device.
Number of AP-Repeaters
Connected
The number of AP repeaters connected to the
device.
Number of Users Connected The number of users currently connected to
the device.