Filter
Top Products
Chapter 4 Using Reports
Displaying Wireless Client Reports
4-4
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Step 5 Select the MAC address or name. The right pane refreshes.
Step 6 From the Report Name list, select Client Statistics Report.
Step 7 Click View. The Client Statistics Report displays in the right pane with the
following information:
Table 4-1 Client Statistics Report
Column Description
Name The name of the wireless client.
IP address The IP address of the wireless client.
Time last seen The time the wireless client was last seen by
the system.
Packets transmitted The number of packets transmitted.
Octets transmitted The number of octets transmitted.
Packets received The number of packets received.
Octets received The number of octets received.
Latest received signal strength A tally of the received signal quality.
Latest signal quality The current index of radio signal quality.
Sleep time in power save mode The number of beacon intervals across which
the station will sleep in power-save mode, or
1 if the station will never be in power-save
mode.
Preferred transmission rate The preferred data transmission rate.
Short retries The number of times the RTS (request to
send) packet had to be retried.
Latest short retries A tally of the number of retries.
Long retries The number of times the data packet had to
be retried.
Latest long retries A tally of the number of retries.
Received WEP errors The number of received encryption errors.
Errors in transmitted packets The number of errors in transmitted packets.
Errors in received packets The number of errors in received packets.