Filter
Top Products
Chapter 3 Configuring Devices
Using the Templates
3-72
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Configuring HTTP Settings
Use this option to configure HTTP settings for the access point.
Procedure
Step 1 Select Services > HTTP The Services: HTTP dialog box appears.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Field Description
Allow Non-Console Browsing From the list, select one of the following:
• Enable—Use this setting to allow
browsing to the management system.
• Disable—Use this setting to make the
management system accessible only
through the console and Telnet
interfaces.
HTTP Port Enter the port through which the access point
provides web access.