Filter
Top Products
4-13
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 4 Using Reports
Displaying Current Reports
Displaying a Detailed Report
Procedure
Step 1 Select Reports > Current. The window refreshes with a device selector in the left
pane.
Step 2 From the device selector in the left pane, click to expand the folder and select the
device for which you want a report. The right pane refreshes.
Step 3 From the Report Name list, select Detailed Report.
Step 4 Click View. In addition to the Detailed Report, the Fault Summary, and the EAP
Authentication Report are also displayed.
Table 4-4 Detailed Report
Column Description
System Name The system name for the device.
Timestamp The time the device’s state last changed.
For more information, see Date and Time
Display on the WLSE, page 1-2.
MAC Address The device’s MAC address.
IP Address The device’s IP address.
Click to open up a browser window to the AP
Summary Status.
Software Version The device’s software version.
Number of Clients connected The number of clients connected to the
device.
Number of Bridges Connected The number of bridges connected to the
device.
Number of AP-Repeaters
Connected
The number of AP repeaters connected to the
device.
Number of Users Connected The number of users connected to the device.
Model The hardware model of the device.
Radio Service Set ID The device’s SSID.