Filter
Top Products
3-39
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Defining the Radio Hardware Settings
Procedure
Step 1 Select Radio > Hardware. The Radio: Hardware dialog box displays in the right
pane.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
IP Port
Receive Enter the ID of a defined IP port protocol
filter, or select one of the filters you created
using Association > IP Port Filters.
Transmit Enter the ID of a defined IP port protocol
filter, or select one of the filters you created
using Association > IP Port Filters.
Table 3-9 Radio Filters Settings (continued)
Field Description