Filter
Top Products
Chapter 3 Configuring Devices
Managing Configuration Jobs
3-94
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Job windows up until that point.
Step 3 From the menu in the left pane, go to the next step, Select Devices. (For additional
information, see Selecting Devices, page 3-94.)
Selecting Devices
Procedure
Step 1 Click Select Devices. The Select window appears.
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Job windows up until that point.
Table 3-21 Job Name
Field Description
Job Name Enter a name for the job.
See Naming Guidelines, page A-1.
Description Enter a description of the job.
See Naming Guidelines, page A-1.
Protocol Select the type of protocol used: HTTP or SNMP.
Note If you select SNMP, you will not be able to use
the Undo feature; it is only supported for
HTTP-based configuration jobs.