Filter
Top Products
Chapter 2 Fault Monitoring
Forwarding Faults
2-16
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Related Topics
• Displaying Faults, page 2-1
• Specifying Fault Thresholds, page 2-7
• Specifying Policies, page 2-13
Setting Trap Notification
This option allows you to enable the WLSE to send north-bound exception
notification to one or more SNMP trap receivers. The exception notification
contains information such as device name and IP, fault number, timestamp,
exception severity, and a message describing the problem.
Before You Begin
Make sure your SNMP trap receiver’s trap receiving daemon is set to the correct
port. The default port is set to 162.
Procedure
Step 1 Select Faults > Fault Forwarding. The Fault Forwarding dialog box appears.
Step 2 Complete the following:
Step 3 If you want a different host to receive trap notification, click add row. There is no
limit to the number you can enter.
To delete a row, click delete, next to the row you want to remove.
Field Description
Trap Check to enable trap notification.
Port Enter the port number if different from the
default of 162.
Host Enter the hostname/IP of the SNMP trap
receiver to which you want to send SNMP trap
notification.
Community Enter the community string.