Filter
Top Products
3-15
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Step 3 Click Add. The new name is added to the list box.
Priority From the list, select one of the following:
• Default—This setting is the same as best effort, which
applies to normal LAN traffic.
• Background—Use this setting for bulk transfers and other
activities that are allowed on the network but should not
impact network use by other users and applications.
• Excellent Effort—Use this setting for a network’s most
important users.
• Controlled Load—Use this setting for important business
applications that are subject to some form of admission
control.
• Interactive Video—Use this setting for traffic with less
than 100 ms delay.
• Interactive Voice—Use this setting for traffic with less
than 10 ms delay.
• Network Control—Use this setting for traffic that must get
through to maintain and support the network infrastructure.
Time to Live (msec)
unicast Enter the number of milliseconds unicast packets should stay in
the access point’s buffer before they are discarded.
multicast Enter the number of milliseconds multicast packets should stay
in the access point’s buffer before they are discarded.
Alert From the list, select one of the following:
• yes—Use this setting to send an alert to the event log when
a user transmits or receives the protocol through the access
point.
• no—Use this setting to not send an alert to the event log.
Table 3-4 Ethertype Filter Special Cases Settings (continued)
Field Description