Filter
Top Products
5-9
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 5 Performing Administrative Tasks
Using Discovery and Managing Devices
LEAP Servers
The WLSE can monitor a LEAP server (CiscoSecure ACS Server) that provides
LEAP services to a wireless LAN using synthetic transactions.
Note Each LEAP server must be specified on the WLSE. For more information, see
Managing LEAP Servers, page 5-26.
Procedure
To set up a LEAP server and add the WLSE as a Network Access Server (NAS)
on the LEAP server:
Step 1 Log into the CiscoSecure ACS Server.
Step 2 Click User Setup on the left side of the initial page. The User Setup page appears.
Step 3 In the User text box, enter the name of the user that the WLSE will use for
synthetic transactions.
Step 4 Click Add/Edit; then enter the appropriate information for the user, including the
password. Click Submit.
Step 5 Click Network Configuration on the left side of the page. The Network
Configuration screen appears.
Step 6 Click Add Entry. The Add Access Server screen appears.
Step 7 Enter the WLSE information in the following text boxes:
• Network Access Server Hostname
• Network Access Server IP
• Key (the shared key)
Step 8 Select RADIUS (Cisco Aironet) from the Authenticate Using list.
Step 9 Click Submit or Submit+Restart. A restart is required for the changes to take
effect.