Filter
Top Products
Chapter 3 Configuring Devices
Using the Templates
3-32
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Step 2 Enter the following information to identify the port:
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Setting Up Ethernet Filters
Use this option to define filters for the Ethernet port, the IP Protocol, and the IP
Port.
Note Changing this setting may cause the access point to reboot.
Field Description
Primary Port? From the list, select one of the following:
• yes—Sets the Ethernet port as the
primary port.
• no—Sets the radio port as the primary
port.
Adopt Primary Port Identity? From the list, select one of the following:
• yes—This adopts the primary port
settings (MAC and IP addresses) for the
Ethernet port.
• no—This uses different MAC and IP
addresses for the Ethernet port.