Filter
Top Products
2-11
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 2 Fault Monitoring
Specifying Fault Thresholds
Step 5 Go to step Step 7.
Step 6 Complete the following:
Step 7 Click Reset to refresh any fields you have changed but want to restore, or Apply
to set the new entries.
Field Description
Enable Check to enable a threshold for this component.
Polling Interval From the list, select the polling interval.
Settings
Down From the list, select the severity level and the
number of polling cycles before the status is
Down.
Up From the list, select the number of polling
cycles before the fault is cleared and the status
is Up.
Field Description
Enable Check to enable a threshold for this component.
Polling Interval From the list, select the polling interval.
Settings
Overloaded From the list, select the severity level, the
percentage, and the number of polling cycles
before the status is Overloaded.
Degraded From the list, select the severity level, the
percentage, and the number of polling cycles
before the status is Degraded.
OK From the list, select the severity level, the
percentage, and the number of polling cycles
before the status is OK.