Filter
Top Products
3-59
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
802.1X Protocol Version (For
EAP Authentication)
From the list, select one of the following:
• Draft 7—No radio firmware versions
compliant with Draft 7 have LEAP
capability, so you should not need to
select this setting.
• Draft 8—Select this option if
LEAP-enabled client devices that
associate with this access point use radio
firmware versions 4.13, 4.16, or 4.23, or
if workgroup bridges associating with
this access point use firmware version
8.58 or earlier.
• Draft 10—Select this option if client
devices that associate with this access
point or bridge use Microsoft Windows
XP EAP authentication, if
LEAP-enabled client devices that
associate with this bridge use radio
firmware version 4.25 or later, or if
workgroup bridges associating with this
access point use firmware version 8.65
or later.
This is the default setting in access point
and bridge firmware versions 11.06 and
later.
Table 3-13 Server-Based Security Settings (continued)
Field Description