Filter
Top Products
3-35
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Default Multicast
Address Filter
From the list, select one of the following:
• allowed—The access point forwards all traffic
except packets sent to the MAC addresses set as
disallowed under Association > Address Filters.
• disallowed—The access point discards all traffic
except packets sent to the MAC addresses set as
allowed under Association > Address Filters.
Maximum Multicast
Packets/Second
Use this setting to control the number of multicast
packets that can pass through the Ethernet port each
second.
If you enter 0, the access point passes an unlimited
number of multicast packets.
If you enter a number other than 0, the device passes only
that number of multicast packets per second.
Default Unicast
Address Filter
From the list, select one of the following:
• allowed—The access point forwards all traffic
except packets sent to MAC addresses that have
been set as disallowed under Association > Address
Filters.
• disallowed—The access point discards all traffic
except packets sent to the MAC addresses that have
been set as allowed under Association > Address
Filters.
Table 3-8 Ethernet Advanced Settings (continued)
Field Description