Filter
Top Products
2-7
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 2 Fault Monitoring
Specifying Fault Thresholds
Fault History
Specifying Fault Thresholds
This window allows you to set polling and exception threshold values collected
from the devices you are monitoring.
The threshold values you set in this window will determine how the faults are
displayed in the Faults > Display Faults subtab.
Description A description of the fault.
Timestamp Indicates the time, based on the client
browser, that the state of the device last
changed.
See Date and Time Display on the
WLSE, page 1-2.
Column Description
Column Description
State The state of the device.
Severity The fault severity level.
Description A description of the fault.
Change A description of the state change.
Timestamp Indicates the time, based on the client
browser, that the state of the device last
changed.
See Date and Time Display on the
WLSE, page 1-2.
By Displays the username of the person
who changed the fault state.
If the fault state has not been
acknowledged, nothing is displayed in
this column.