Filter
Top Products
Chapter 3 Configuring Devices
Using the Templates
3-4
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Procedure
Step 1 Select Express Template. The Express dialog box displays in the right pane:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Table 3-1 Express Template Settings
Field Description
Configuration Server Protocol Set this entry to match the network’s method
of IP address assignment.
From the list, select one of the following
options:
• None-Static IP—Use this if your
network does not have an automatic
system for IP address assignment.
• BOOTP—Use this if your network uses
Bootstrap Protocol, in which IP
addresses are hard-coded based on MAC
addresses.
• DHCP—Use this if your network uses
Dynamic Host Configuration Protocol,
in which IP addresses are “leased” for
predetermined periods of time.
Default Subnet Mask Enter an IP subnet mask to identify the
subnetwork so the IP address can be
recognized on the LAN.
If DHCP or BOOTP is not enabled, this field
is the subnet mask.
If DHCP or BOOTP is enabled, this field
provides the subnet mask only if no server
responds to the access point's DHCP or
BOOTP request.