Filter
Top Products
3-65
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Configuring Hot Standby Settings
Use this option to configure a standby access point as a client device associated
to a monitored access point.
Procedure
Step 1 Select Services > Hot Standby. The Services: Hot Standby dialog box appears.
Columns (64-132) Enter a number to define the width of the
terminal emulator display within the range of
64 characters to 132 characters.
Lines (16-50) Enter a number to define the height of the
terminal emulator display within the range of
16 characters to 50 characters.
Telnet From the list, select one of the following:
• Enable—Use this setting to enable
Telnet access to the management system.
• Disable—Use this setting to prevent
Telnet access to the management system.
Table 3-15 Services > Console/Telnet Settings (continued)
Field Description