Filter
Top Products
5-47
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 5 Performing Administrative Tasks
Managing the Appliance
Selecting an Authentication Module
The Local login module is selected by default, but you can select a different
module.
Procedure
Step 1 Select Administration > Appliance > Security > Authentication Modules. The
Authentication Modules dialog box appears.
Step 2 Select an authentication module from the Select Module drop down list, then click
Submit. A Configuration dialog box appears for all selections except the Local
module.
Step 3 Depending on the authentication module you selected, enter the following data,
then click Submit:.
• Radius module or TACACS+ module:
–
Primary Server and Secondary Server—IP addresses or DNS names of
the primary and secondary authentication servers. A secondary server is
optional.
–
Shared Secret—Secret key.
• MS NT Domain module:
–
Domain—Name of the Windows domain.
–
Primary Domain Controller and Backup Domain Controller—Names of
the primary and backup Windows domain controllers. A backup domain
controller is optional.
After you change the authentication module, you do not have to restart the
Wireless LAN Solution Engine. Changing the module does not affect users who
are currently logged on. Users who log on after the change use the new module.
Related Topic
Overview: Security, page 5-45