Filter
Top Products
Chapter7 Troubleshooting
7-6
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Configure > Jobs The job completed
with errors.
This error can be seen in
jobs where pre- or post-
configuration backups
before or after applying
the new configuration
fail, but the new
configuration is applied
successfully.
Check if “Completed with
errors” appears in the Job
Run Detail > Job Run Log
to identify this problem.
There is a time
discrepancy in
scheduled jobs.
The time is not set
correctly on the WLSE.
Using CLI commands, reset
the time to Universal
Coordinated Time (UTC) as
follows:
1. Enter services stop to
stop services.
2. Enter the clock
command to reset the
time.
3. Enter services start to
restart the services.
Feature Symptom Probable Cause Possible Solution