Filter
Top Products
5-5
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 5 Performing Administrative Tasks
Using Discovery and Managing Devices
3. Set the community
string by creating a
user with all
privileges.
(If you already
entered an SNMP
Admin Community
name, the user created
has Write, SNMP,
Firmware, and Admin
privileges, and the
User Manager is
enabled, you do not
need to create another
user.)
1. In the Summary Status page, click
Setup. The Cisco Services Setup
page appears.
2. Under Services, click Security. The
Security Setup page appears.
3. Click User Information; then click
Add New User. The User
Management window appears.
4. To create an user with SNMP
read/write privileges, enter a
username and password and select
the Write, SNMP, Firmware, and
Admin capabilities.
5. Click Apply or OK.
The username of the user with
Write and SNMP privileges is used
as the SNMP read/write
community string.
The Firmware privilege is required
for configuring devices from the
WLSE.
Tasks Procedure Notes