Filter
Top Products
3-17
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Using this option you can also:
• Create Special Cases —See Creating Special Cases, page 3-18.
• Delete Special Cases—See Deleting Special Cases, page 3-21.
Creating New IP Protocol Filters
Procedure
Step 1 To create and enable IP protocol filters, enter the following:
Step 2 Click Add. The new name is added to the Current Protocol Filters list.
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
Field Description
Add New Protocol Filter
Set ID Enter an identification number for the filter set.
Set Name Enter a descriptive filter set name.
See Naming Guidelines, page A-1.
Default Disposition From the list, select one of the following:
• Forward—Use this setting to forward protocol
traffic.
• Block—Use this setting to block protocol traffic.
Default Time to Live (msec)
unicast Enter the number of milliseconds unicast packets
should stay in the access point’s buffer before they are
discarded.
multicast Enter the number of milliseconds multicast packets
should stay in the access point’s buffer before they are
discarded.