Filter
Top Products
Chapter 2 Fault Monitoring
Specifying Fault Thresholds
2-10
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Step 7 Click Reset to refresh any fields you have changed but want to restore, or Apply
to set the new entries.
Setting Switch Fault Thresholds
Using this option, you can set up thresholds for switch faults. When the thresholds
are exceeded, faults are generated and can be viewed under Faults > Display
Faults.
Procedure
Step 1 Select Faults > Specify Fault Threshold. The Fault threshold window appears.
Step 2 Select Switch in the left pane and the menu expands.
Step 3 Select any of the following to set values for:
• SNMP Reachable —Go to Step 4.
• CPU utilization—Go to Step 6.
• Memory utilization—Go to Step 6.
• Port Status—Go to Step 4.
• Port Utilization—Go to Step 6.
• Module Status—Step 4.
Step 4 Complete the following:
Degraded From the list, select the severity level,
the percentage, and the number of
polling cycles before the status is
Degraded.
OK From the list, select the severity level,
the percentage, and the number of
polling cycles before the status is OK.
Field Description