Filter
Top Products
2-9
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 2 Fault Monitoring
Specifying Fault Thresholds
• Ethernet port utilization—Go to Step 6.
• Ethernet port packet errors—Go to Step 6.
Step 4 Complete the following:
Step 5 Continue to Step 7.
Step 6 Complete the following:
Field Description
Enable Check to enable a threshold for this component.
Polling Interval From the list, select the polling interval.
Settings
Down From the list, select the severity level and the
number of polling cycles before the status is
Down.
Up From the list, select the number of polling
cycles before the fault is cleared and the status
is Up.
Field Description
Enable Check to enable a threshold for this
component.
Polling Interval From the list, select the polling
interval.
Settings
Overloaded From the list, select the severity level,
the percentage, and the number of
polling cycles before the status is
Overloaded.