Filter
Top Products
3-77
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Shared Secret Enter the shared secret used by your server.
It must match the shared secret on the
RADIUS server.
Time Out (sec’s) Enter the number of seconds the access point
should wait before authentication fails.
If the server does not respond within this
time, the access point tries to contact the next
defined authentication server.
Enable Update From the list, select one of the following:
• enable—Use this setting to allow
accounting update messages for wireless
clients.
With updates enabled, the access point
sends an accounting start message when
a wireless client associates to the access
point, sends updates at regular intervals
while the wireless client is associated to
the access point, and sends an
accounting stop message when the client
disassociates from the access point.
• disable—Use this setting to not allow
accounting update messages.
With updates disabled, the access point
sends only accounting start and
accounting stop messages to the server.
Update Delay (sec’s) Enter the update interval in seconds.
If you use 360, the access point sends an
accounting update message for each
associated client device every 6 minutes.
Table 3-18 Accounting Settings (continued)
Field Description