Filter
Top Products
B-15
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Appendix B Command Reference
Privilege Level 0 Commands
Uptime: 4 days 20 hours 6 mins
Linux/UID32 version 2.2.16-13bipsec.uid32 (gcc version egcs1
traceroute
To display the network route to a specified host and identify faulty gateways, use
the traceroute command.
traceroute [-f first_ttl] [-m max_ttl] [-w waittime] host [packetlength]
Syntax Description
-f (Optional) Sets the time-to-live used in the first outgoing
probe packet.
first_ttl Time-to-live value of the first outgoing probe packet. The
default is 1 hop.
-m (Optional) Sets the maximum time-to-live (maximum
number of hops) used in outgoing probe packets.
max_ttl Maximum time-to-live for outgoing probe packets. The
default is 30 hops.
-w (Optional) Sets the time to wait for a response to a probe, in
seconds.
waittime Time to wait for a response to a probe, in seconds. The
default is 5.
host Name or IP address of host to which to connect.
packetlength (Optional) The length of the packet to send, in bytes. The
default and minimum value is 40.
Usage Guidelines
Use the traceroute command to trace the network route to a specified host and
identify faulty gateways. The command displays a list of the hosts that receive
probe packets as they travel to the destination host, in the order that the receiving
hosts receive the packets. Asterisks (*) appear as the list entry for hosts that do
not respond to probing correctly.