Filter
Top Products
Chapter 4 Using Reports
Displaying Wireless Client Reports
4-2
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
The frequency with which the Wireless Clients reports are updated is 5 minutes
by default. To change the default setting, see Managing System Parameters,
page 5-58.
Note Your login determines whether you can use this option.
Following are the report types you can view:
• Client Detail Report—See Displaying a Client Detail Report, page 4-2
• Client Statistics Report—See Displaying a Client Statistics Report, page 4-3
• Client Historical Association Report—See Displaying a Client Historical
Association Report, page 4-5
Displaying a Client Detail Report
Procedure
Step 1 Select Reports > Wireless Clients. The Wireless Clients selector appears in the
left pane.
Step 2 From the list, select the method you want to use to search for clients: by MAC
address or name.
Step 3 Enter the MAC address or name. You can use an asterisk (*) as a wildcard to
denote numbers and letters.
Note The MAC address must be entered in hexadecimal, for example
0070eb37c90.
Step 4 Click Search. A list appears in the left pane.
If you chose MAC address in the previous step, MAC addresses are listed; if you
chose name, names are listed.