Filter
Top Products
Chapter 4 Using Reports
Displaying Current Reports
4-14
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Root or Repeater Indicates the role of the device.
Subnet Mask The subnet mask.
Ensure Compatibility With
2Mbps Clients
Indicates whether it is compatible with
2Mbps clients.
Ensure Compatibility With
non-Aironet 802.11
Indicates whether it is compatible with
802.11.
SNMP Trap Destination The IP address or host name of the server
running the SNMP Management software.
HTTP Port The device’s HTTP setting.
Hot StandBy Indicates whether the hot standby unit is in
monitoring mode.
If true, the current unit is in monitoring
mode.
Count of Access Point observed
by this AP
Number of access points seen by the access
points.
Current operating frequency
channel
The radio channel being used.
Ethernet Port Status The operational status of the Ethernet port.
Radio Port Status The operational status of the radio port.
Transmit Power (mW) The access point’s transmission power
setting in milliwatts.
Switch IP (to which this AP is
attached)
The IP address of the switch to which this
access point is attached.
Switch Name (to which this AP
is attached)
The name of the switch to which this access
point is attached.
Encryption type Indicates that devices using WEP are allowed
to communicate with the access point.
Length of WEP key 1 through 4
(in bits)
The WEP key length.
Table 4-4 Detailed Report (continued)
Column Description