Filter
Top Products
Chapter 3 Configuring Devices
Using the Templates
3-8
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Procedure
Step 1 Select Association. The menu expands and the Association dialog box displays in
the right pane.
Step 2 Select one of the following from the Association menu:
• Spanning Tree—Defining Spanning Tree Protocol, page 3-8.
• Address Filters—Defining Address Filters, page 3-11.
• Ethertype Filters—Defining Ethertype Filters, page 3-12.
• IP Protocol Filters—Defining IP Protocol Filters, page 3-16.
• IP Port Filters—Defining IP Port Filters, page 3-21.
• Advanced—Defining Advanced Associations, page 3-25.
• Port Assignments—Configuring Port Assignments, page 3-30.
Defining Spanning Tree Protocol
This option is used for only bridges.
Procedure
Step 1 Select Association > Spanning Tree. The Association: Spanning Tree Protocol
dialog box appears.
Step 2 Click see details for information on which bridges this configuration is valid.