Filter
Top Products
Chapter 4 Using Reports
Displaying Current Reports
4-16
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Step 4 Click View. The group report is displayed with the following headings:
Step 5 To sort table data, click on the column heading you want to use to sort the data:
• A triangle indicates ascending order.
• An upside-down triangle indicates descending order.
• No triangle indicates that the data is not sorted.
Step 6 To export the report, click Export. (See Exporting a Report, page 4-28.)
Step 7 To email the report, click Email Report. (See Emailing a Report, page 4-28.)
Displaying an EAP Authentication Report
Procedure
Step 1 Select Reports > Current. The window refreshes with a device selector in the left
pane.
Step 2 From the device selector in the left pane, click to expand the folder and select the
access point for which you want a report. The right pane refreshes.
Step 3 From the Report Name list, select EAP Authentication Report.
Table 4-5 Current Client Association Report
Column Description
Name The name of the client associated with the access point.
IP Address The IP address of the wireless client.
MAC Address The wireless client’s MAC address.
Device Type The wireless client device type.
Timestamp The time the device was last seen by the system.
For more information, see Date and Time Display on the
WLSE, page 1-2.
State The operational state of the device.