Filter
Top Products
3-7
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Step 2 Select one of the following:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Setting Up Association
Use this option to set up spanning tree protocol (STP) on bridges and to set up
filtering to control the flow of data through the access point.
Ensure Compatibility with Cisco From the list, select one of the following:
• Enable—Use this setting to
automatically configure the device to be
compatible with other Cisco devices on
your wireless LAN.
• Disable—Use this setting to not
automatically configure the device to be
compatible with other Cisco devices on
your wireless LAN.
Ensure Compatibility with
2MB/sec Clients
From the list, select one of the following:
• Enable— Use this setting to operate at a
maximum speed of two megabits per
second.
• Disable—Use this setting if you do not
want devices to operate at a maximum
speed of two megabits per second.
Table 3-1 Express Template Settings (continued)
Field Description