Filter
Top Products
Appendix B Command Reference
Command Summary
B-4
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Command Summary
Table B-1 summarizes all commands available on the WLSE. Refer to the full
description of commands that you are not familiar with before using them.
Table B-1 Command Summary
Command
Privilege
Level Summary Description Location of Full Description
auth 15 Enables secure remote authentication. “auth” section on page B-16
backup 15 Backs up the WLSE. “backup” section on
page B-17
backupconfig 15 Sets the configuration for all backup and
restore operations.
“backupconfig” section on
page B-18
cdp 15 Configures the Cisco Discovery Protocol
(CDP).
“cdp” section on page B-19
clock 15 Sets the WLSE’s date and time. “clock” section on page B-20
df 15 Display the current storage usage on the
WLSE.
“df” section on page B-22
erase config 15
1
Erases the configuration in Flash memory
and reload the device.
“erase config” section on
page B-22
exit 0 Logs user out of the WLSE. “exit” section on page B-10
gethostbyname 15 Displays IP address of a known domain
name.
“gethostbyname” section on
page B-24
fsck N/A
2
Checks and repairs the filesystem. “fsck” section on page B-76
firewall Implements port filtering on the WLSE. “firewall” section on
page B-23
hostname 15 Changes the system hostname. “hostname” section on
page B-25
import 15 Imports host files, or to maps IP
addresses to hostnames.
“import” section on page B-25
install
configure
15 Configures the repository that the
Wireless LAN Solution Engine uses to
install updates.
“install configure” section on
page B-27